Vox Infragilis
FEATURES
| Frequency ranges | 140 ÷ 250 MHz range (other upon request) |
| Switchable channels | 16 channels in the 10MHz of band. They are easily PC reprogrammable by the optional “UPK100 Programming kit” |
| Switching-window | 10 MHz in the 140 ÷ 250 MHz range (other upon request) |
| Frequencies | microprocessor controlled PLL synthesizer circuit, with 25 kHz step (standard), 5KHz (on request) |
| Frequency error | < ±5 ppm, in the rated temperature range |
| RF Power | switchable 10mW /300 mW (± 1 dB) according to local regulations |
| Max RF output power | 300 mW |
| Antenna connector | N-F connector |
| RF impedance | 50 Ω |
| Modulation | FM |
| Peak deviation | ±5 kHz |
| Spurious emissions | < 2 nW |
| Telemetry feature | remote PTT (Push To Talk) circuit, wired to ¼” (6.3 mm) mono jack connector. The transmission is allowed when the central pin (hot) is connected to external ring (ground). Only with Optinal VOX38 |
| Noise Reduction system | compressor circuit with noise-gate, specially adapted to the MicroEar receivers |
| AF bandwidth | 200 Hz ÷ 5 kHz (-3 dB) |
| Distortion | < 0.5 % (0.25% typ.) |
| SND/D ratio (Analogue) | > 80 dB (83 dB typ.), CCITT measured |
| Audio input connector | XLR3-F type connector The audio input line is transformer balanced and floating. • pin 1 = ground; • pin 2 = AF-a input; • pin 3 = AF-b input |
| Audio input level | Micro / Line switchable, and externally adjustable between: - Micro = -64 ÷ -34 dBu (0.5 ÷ 15 mV) Input impedance: 2 kΩ - Line = -22 ÷ +8 dBu (60 ÷ 1,950 mV) Input impedance: 10 kΩ |
| Max input level | +8 dBu peak limiter automatic, with dynamic-range > 30 dB over the level set for the nominal modulation. |
| LED | Transmitter On (red LED) Limiter On (yellow LED) |
| Power supply | 10.5 ÷ 16 Vdc, 300 mA max. (negative ground) |
| Temperature range | -10 ÷ +55 °C |
| Dimensions | 40 x 120 x 175 mm |
| Weight | Approx. 700 g. |
No accessories found