Version: v1.4.1.D
Date: 2020-12-04
MTP40S
- Added Data Extended: thanks to this feature the transmitter sends through the tone squelch in addition to the battery level also the type of compander (ENR/ENC) and the modulation (WB/NB). The receiver displays a mismatch error if it has set the wrong compander and/or modulation
Version: v1.4.0.J
Date: 2020-11-09 13:54:57
MTP41S
Added: FW updates installation and management through new software Manager
Added: commands optimization on Manager
Version: v1.30.0P
Date: 2016-12-15 13:41:59
MTP41S
changed – disabled the editing by menu of audio AF input between dB (AF Gain) and dBu (AF Max Level). It is not possible anymore change the AF input between dB and dBu using the menu of the display. It is possible to change it only using the manager.
Version: v1.30.0N
Date: 2016-11-16 13:39:47
MTP41S
add – management 5kHz step: the firmware is able to work at 5KHz of step (instead of 25kHz).
NOTE: to work at 5kHz step, the transmitter has to be pre-configured in the factory.
NOTE: Wisycom doesn’t suggest to upgrade the firmware on devices at 25kHz (standard version) because no new feature is implemented.
Version: v1.30.0F
Date: 2015-07-06 11:03:22
MTP41S
fix – change power up/down delay: increase the delay of RF power up/down from 300ms to 500ms