MRK960

BUG FIX:

• Glitch problem on RX1 when no audio on receiver RX2 (carrier not modulated) and vice versa.
• The MRK960 now is compatible with the MTP60, MTP61, and MTH610, except for battery data decoding. For proper sync, the ENS compander must be manually selected on the receiver.

• added ENS compander for compatibility with MTP60 (enabled as default on any MRK960)
• added JNS compander for compatibility with MTP60-JP Japan version (enabled as default on any MRK960)

added: do not show the battery level of transmitters with 16-bit battery data (Data: Extended)

fix: the Manager does not update correctly the frequency settings information when it is changed in the unit through the display menu

add: activation code – (to enable/disable compander, SN depending)

fix – 20 seconds of delay on audio output with sen compander (bug introduced on v1.1.0.A).

fix – wrong setting of TSQ OFF when Frequency Diversity is enabled and sen compander with TsqAdv (bug introduced on v1.1.0.A)

fix – interference and spikes on the RF signal around the freq. range 510-650 Mhz when opening MTH400 battery compartment
(opening the squelch with audible noise on the output too).

fix – noise when switching on the transmitter (ALSO: upgrade of firmware on microphone to 1.30.0F is required)

new – add new companders JNR e JNC: the new companders JNR and JNC works with Wisycom transmitters for Japanese market
(Wisycom codes: MTP41-JP, MTP40-JP and MTH400-JP).

new – configurable delay for the activation of the audio when the tone squelch is detected