Wisycom Products

Vox Infragilis

Wisycom International
Wisycom USA
Wisycom Germany

MTP40S

Breitband-Taschensender

MTP40S ist ein extrem kleiner und leichter Taschensender für professionelle Mikrofonanwendungen. Dank des OLED Displays, den Knöpfen für Schnellzugriff und dem Joggle Rad ist er sehr einfach und schnell zubedienen. MTP40S besitzt auch die neueste Wisycom HF Technik und ist so noch besser
geschützt vor Intermodulationen und Rauschen.

Verbesserte Eigenschaften:
– Neues weisses OLED Display (128×32 Punkte)
– Integrierter HW Limiter

Eigenschaften

  • Bis zu 232 MHz Schaltbandbreite im Bereich 470– 798MHz (andere Bereiche auf Nachfrage)
  • Erweiterter Dynamikbereich mit HW Limiter im
    Eingang (30dB über Peak)
  • Extreme Unterdrückung von Eigeninterferenzen durch Wisycom eigenen Schaltkreis.
  • Innendesign mit flexiblem Schaltungsplatinen spart anfällige Steckverbindungen und macht das Gerät noch zuverlässiger.
  • Ultraleichte Metall-Legierung (80g ohne Batterien)
  • Vom Benutzer wählbare Kompandersysteme
    ENR (optimiert auf Rauscharmut)
    ENC (optimiert für Sprache)
  • Batterie: 2x AA Alkaline, NiMH oder Lithium Akkus.
  • Laufzeit:
    > 7h bei 100mW Ausgangsleistung
    > 10h bei 50mW Ausgangsleistung
    > 14h bei 10mW Ausgangsleistung
  • Infrarot Interface zur Fernbedienung und Firmware Updates
  • Einfache und schnelle Programmierung durch OLED Display, Direktwahl von Gain- und Frequenz sowie Joggle Rad.
  • Erweiterer Regelung des Mikrofoneingangs 85dB in 1dB Schritten.
  • Maximale Eingangsspannung: 26dBu (15.5V Clipping) für direkten Anschluss an Mischpulten oder Instrumenten.
  • 48V Phantomspeisung in Verbinung mit dem
    PHA48 Zubehör
Download
Frequency rangesB7 option: 470 ÷ 663 MHz
B3 option: 510 ÷ 698 MHz
B2 option: 566 ÷ 798 MHz
BP option: 806 ÷ 810 MHz
B8 option: 940 ÷ 960 MHz
B6 option: 960 ÷ 1160 MHz
Switchable channels2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window Up to 232 MHz, depending on band (see Variants below)
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency error± 2.5 ppm, in the rated temperature range
RF Powerswitchable typ. 20 mW/ 20L mW / 50 mW /100 mW
note: in some countries high power can be disabled, for local norm!
Antenna connectorLEMO-F 1 pin
Modulation wideband FM, with pre-emphasis (Narrowband on request)
Nominal deviation±40 kHz Wideband (±25 kHz Narrowband option)
Peak deviation±56 kHz Wideband (±35 kHz Narrowband option)
Spurious emissions< 2 nW
Telemetry featureTX transmits also a digitally modulated sub-carrier, suitable for:
▪ tone-squelch operating
▪ remote battery monitoring
▪ optional PTT (push to talk) operation
Noise Reduction systemENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth45 Hz ÷ 21 KHz (3dB), 55 Hz ÷ 20 KHz (1dB) Wideband with LPF at 20KHz
45 Hz ÷ 17 KHz (3dB), 55 Hz ÷ 15 KHz (1dB) Narrowband with LPF at 15kHz
Distortion< 0.3 % (0.15 % typ.)
SND/D ratio (Analogue)typ. 115 dB (A)rms with 40 kHz deviation ▪ typ. 121 dB (A)rms with 56 kHz deviation Wideband
typ. 115 dB (A)rms with 25 kHz deviation ▪ typ. 121 dB (A)rms with 35 kHz deviation Narrowband
Audio input connectorLEMO or DPA, gain selectable -60 ÷ +40dB
LEMO connector configurable on ‘mic’ display menu in 5 options:
▪ ’2 wires’: -54 dBu ÷ +26 dBu peak, no bias voltage
▪ ‘2 wires + bias’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply
▪ ‘3 wires: -54 dBu ÷ +26 dBu peak
▪ ‘2 wires & phantom’: -54 dBu ÷ +26 dBu peak
▪ ‘2 wires + bias & phantom’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply
DPA connector (2 pin microdot audio connector) configurable only
▪ '2 wires': -54 dBu ÷ +26 dBu peak, no bias voltage
▪ '2 wires+bias': -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply
Audio input levelfrom -54 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max input level +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Managing interfaceIrDA
LEDRGB led indication with (red, green and blue) on wireless power switch:
▪ Wireless transmission status: GREEN on/RED off
▪ Battery lifetime status: GREEN steady (> 25%), slowly blinking (< 25%), quickly blinking (<12%)
▪ Modulation peek (if activated & the limiter is disabled): RED
▪ Ptt status: RED if active
▪ Limiter into action: Blue
Battery lifetime indication8 steps : 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT functionPin 3 of the AF connector can be setup to an external push button
DisplayHigh contrast OLED white display (128 x 32 pixels)
Power supply2 AA size cell (Alkaline, rechargeable NiMH or Lithium)
Power consumption250mA@ 2.6V average (display off, 100mW power)
Battery lifewith 2 AA alkaline
▪ approx. 14 hours @ 10mW
▪ approx. 10 hours @ 50mW
▪ approx. 7 hours @ 100mW
▪ approx. 6 hours @ 20mW Intermod Free “20L” level
Temperature range-10 ÷ +55 °C
Dimensions73,1mm x 64,5mm x 21,6mm (HxWxD) with clip
WeightApprox. 85 g. without batteries (135g with batt.)

Version:  v1.4.0.J

Date:  2020-11-05

MTP40S

  • Added: FW updates installation and management through new software Manager
  • Added: commands optimization on Manager
  • Changed: Reduce time of starting at 6.5 seconds
  • Added: compatibility with Eneloop Pro

Version:  v1.30.0V

Date:  2019-01-17

MTP40S

added – management of Narrow Band feature to set during the SYNC automatically the receiver (MPR52, MRK980) in Narrow Band mode

changed – Factory Preset configures the max level of power allows in the set frequency

Version:  v1.30.0R

Date:  2018-10-12

MTP40S

added – management of frequency with 4 digits for Band 6 [960-1160MHz] and Band 9 [1240-1260MHz]

Version:  v1.30.0P

Date:  2016-12-15

MTP40S

changed – disabled the editing by menu of audio AF input between dB (AF Gain) and dBu (AF Max Level). It is not possible anymore change the AF input between dB and dBu using the menu of the display. It is possible to change it only using the manager.

 

Version:  v1.30.0G

Date:  2016-02-03

MTP40S

add – management 5kHz step: the firmware is able to work at 5KHz of step (instead of 25kHz).

NOTE: to work at 5kHz step, the transmitter has to be pre-configured in the factory.
NOTE: Wisycom doesn’t suggest to upgrade the firmware on devices at 25kHz (standard version) because no new feature is implemented.

Version:  v1.30.0F

Date:  2015-07-07

MTP40S

fix – change power up/down delay: increase the delay of RF power up/down from 300ms to 500ms

Version:  v1.30.0A

Date:  2015-02-19

MTP40S

new – IrDA enabled at power on: After power on of the transmitter the IRDA interface will be activate as default for 15 seconds in order to allow the user to configure/upgrade the device without to enter on the display submenu.
After about 10 seconds without IRDA activity, the IRDA interface will be automatically disabled.

new – Lithium battery

new – name of transmitter: to identify the transmitter. It is shown on the new NAME menu and can be modify using the MTxxx Manager.
The Tx NAME doesn’t replace the receiver’s name shows in the status menu after a SYNC with a Wisycomm receiver.

new – NAME menu: to show the frequency set on the device and the transmitter name. It is possible to enter quickly in the menu using the combination of buttons CH+GR.

new – INFO menu: to show: FW version, HW version, Serial number, Bandwidth, Bootloader version, Options

new – change unit of measure of AF input by display: between dB (AF Gain) and dBu (AF Max Level)

new – lock/hidden of each parameter: Each parameter can be locked (not editable by display) or hidden (not visible by display) in the Current Setting panel of MTxxx Manager*

new – hidden INFO menu using MTxxx Manager*

changed – lock/don’t care of each parameter of PRESET: for each parameter of Preset it is possible to set separately the propriety of “lock” or “don’t care”

*from MTxxx Manager version 1.1.5

Version:  v1.22.0F

Date:  2014-08-06

MTP40S

new – options table: to manage up to 7 options

Konfigurator

AUJPUS8EUEUXUSX
B2B3B6B7B8
BLPV
DPLM
Auswahl zurücksetzen
Artikelnummer: n.a. Kategorien: , Schlagwörter: , , ,