MPR30-ENG

Name: MPR30-ENG
Availability: InStock

Wideband ENG Receiver - Discontinued

MPR30ENG is a compact true diversity receiver designed for professional ENG, broadcast, and field production applications. This receiver features a real TRUE DIVERSITY configuration along with a unique wide-band tuning range up to 232 MHz.

All audio processing is managed by a powerful DSP to allow multicompanding, audio enhancement and a digital control data. Very easy and versatile thanks to its:

Oled display,
navigation button controls,
infrared sinc and programming,
micro-usb,
automatic scan.

FEATURES

Up to 232 MHz bandwidth in 470/798 MHz range
TRUE DIVERSITY RECEIVER with 2 whip antennas
Miniature design with integrated battery pack: rechargeable lithium pack or 2 x AA batteries
Easy to use thanks to an OLED display
Dedicated function buttons
Frequency scan function
Automatic transmitter programming thru infrared and USB
MIC and LINE balanced outputs

Download

Frequency ranges	N option: 470 ÷ 700 MHz M option: 566 ÷ 798 MHz
Switchable channels	2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window	Up 232 MHz
Frequencies	microprocessor controlled frequency synthesizer circuit, with 25 kHz minimum step; frequencies is easily PC reprogrammed with USBmini interface or optional UPKmini programmer
Frequency error	< ± 2.5 ppm, within the rated temperature range
Diversity technique	true-diversity
Modulation	FM, with de-emphasis
Nominal deviation	±40 kHz
Peak deviation	± 60 kHz
Antenna input impedance	50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity	2 μV ( 6 dBμV), for SND/N > 58 dB; 5 μV (14 dBμV), for SND/N > 98 dB in the whole switching-window *
Amplitude response	< 0.5 dB (for RF input signal:6 dBμV ÷ 100 dBμV)
Co-channel rejection	> 2.5 dB
Adjacent chan. selectivity	> 80 dB typical (for channel spacing ≥ 400 kHz)
Spurious rec. rejection	> 100 dB
IF image rejection	> 90 dB
Intermod. rejection	> 76 dB
IIP3	> +10 dBm typical
Spurious emissions	< 2 nW (typical = 0.1 pW)
Noise Reduction system	ENR (Wisycom Extended-NR)
AF bandwidth	30 Hz ÷ 20 kHz
Frequency response	± 0.5 dB in the 30 Hz ÷ 19 kHz range.
Distortion	0.3 % typical
SND/D ratio (Analogue)	100 dB typical*
Audio output	mono balanced on 3.5 mm jack socket lockable
Audio output level	MAX +18 dBu (peak deviation), adjustable in one dB step in a range of 54 dB
Headphone-output	3.5 mm jack socket lockable
Powering	2 x IEC-LR6 1.5V size-AA alkaline or NiMh rechargeable - C3-V3 battery pack - KLIC 8000 or CR-V3R lithium (i.e. DR9708 duracell)
Battery life	- approx. 7 hours with MPRLBP Lithium-ion battery pack CS-KLIC8000 type - approx. 3.5 hours with 2x AA Alkaline batteries Energizer - approx. 4.5 hours with 2x AA NiMH 2.5Ah
Temperature range	-10 ÷ + 55 °C
Dimensions	91mm x 71.5mm x 27mm (HxWxD) with clip
Weight	100 g approx. without batteries
	*RMS value, A-weighted, 22 Hz / 22 KHz

Documents
- Brochure
  
  MPR30_ENG-en-b11
- User Manual
  
  MPR30_ENG-en-u14-A5
Applications
- Manager
  
  MPRxx Driver
  
  Wisycom USB Drivers & Instructions
  
  Wisycom Manager v1.2
- Firmware
  
  MPR30-ENG_v1.14
  
  MPR30-ENG_v1.13
Images

Version: v1.14

Date: 2018-04-10

MPR30-ENG

Added “Panel Lock” parameter (under Settings menu):
– When it is set to”Yes“, all the parameters are locked except the Group/Channel/freq & Audio level (MIC/LINE).
– When it is set to “ENC*“, the device loads the Factory Preset and set the expander to ENC-Wis and the LINE level to +12dBu. All the parameters are locked except the Group/Channel/freq & Audio level (MIC/LINE).
fix: bug on the expander settings: after the loading of the preset with a different expander setting (ex. Exp. current ENR-Wis, expander Preset 1 ENC-Wis) , the expander is loaded correctly (ex. ENC-Wis); but after the reboot of the receiver, the device starts with the previous expander (ex. ENR-Wis)

NOTE: FACTORY PRESET settings:
Headphone: -10dB
Squelch: 12dBuV
Expander: ENR-Wis
Tone sq.: OFF
MIC: -18dBu
Sig. Phase: 0
Display contrast: 3 sec
Display timeout: 15 sec
Off timeout: OFF
LED: Full

Firmware

Version: v1.13

Date: 2017-11-08

MPR30-ENG

new – add remote scan thru manager

Version: v1.12

Date: 2016-09-07

MPR30-ENG

new – add 180° display rotation: selectable through the menu “Settings>Display>Direction”

Firmware

Version: v1.11

Date: 2014-12-12

MPR30-ENG

new – add minor features for production process to manage new band J 712-832MHz (update is not required)

Firmware

Version: v1.8

Date: 2014-05-13

MPR30-ENG

– fix headphone output level setting problem

Firmware

Version: v1.7

Date: 2013-11-29

MPR30-ENG

– mod: in case of power on with hidden channel -> tuning to the first group/channel not hidden
– add: SR compander (Shure R-series)
– fix: IRDA communication problem
– mod: display contrast
– mod: frequency menu
– fix: led on even if Display set to OFF

Firmware

Version: v1.6

Date: 2013-07-30

MPR30-ENG

–Fix: decreased background noise
–Add: new compander ENR-v1.2
–Mod: display brightness during plug/unplug of the USB cable
–Mod: deviation baron the display
–Mod: battery level during the lithium battery charge (the battery level shows the actual level of charge)
–Add: sync with MTK952 (the MPR30-ENG sends RX-name and frequency to the transmitter)

Firmware