• Zur Hauptnavigation springen
  • Skip to main content
  • Zur Hauptsidebar springen
  • Zur Fußzeile springen

Wisycom Products

Vox Infragilis

Hauptmenü

  • Firma
    • Geschäftsbericht
    • kontaktieren Sie uns
    • Karriere
  • Downloads
  • Produkte
  • News & Events
    • News
    • Pressemitteilung
    • Ausstellung
    • Archiv
  • Support
    • Vertriebsnetz
    • Service Anfrage
    • Downloads
    • Firmware Freigabemitteilung
    • Reserved Area
  • Konto
    • Customer Profile
    • Product Registration
    • Edit Account
Wisycom
Wisycom International
Wisycom USA
Wisycom Germany

Haupt-Sidebar

Produktkategorien

  • Drahtlose Mikrofonsysteme
    • Taschensender
    • Empfänger für Rundfunk, Reportage und Filmton
    • Aufstecksender
    • Empfänger für Studio und Ü-Wagen
    • Handsender
  • Zubehör
    • Antennen
    • Batterien und Stromversorgungen
    • Audiokabel und Zubehör
    • MCR41-MCR42 Slot-in
    • Mikrofonadapter
    • Programmier-Geräte
    • Taschen
    • Montageadapter
    • HF Kabel und Zubehör
  • Glasfaser-Systeme
    • Glasfaser-Box
    • Glasfaser-Rackgeräte
  • In-Ear Monitor Systeme
    • UHF IEM Systeme
    • VHF IEM Systeme
  • Drahtlosverbindungen für Ü-Wagen
  • UHF Verteilung
    • Antennen
    • Antennenweichen und Combiner
    • Antennenverstärker
    • Leistungsverstärker
  • Drahtlose Kommunikationssysteme
    • Unidirektionale IFB Intercom-Systeme
    • Bidirektionale Full-Duplex-Systeme
  • Drahtlose Reportagesysteme
  • Discontinued
Products/Drahtlose Mikrofonsysteme/Empfänger für Rundfunk, Reportage und Filmton/MCR41S-42S

MCR41S-42S

Doppel-Kameraempfänger, True Diversity, UHF
  • Beschreibung
  • Technische Daten
  • heruntergeladene Dateien
  • FW Veröffentlichungen
  • Zubehör

MCR42 haben wir als Kameraempfänger entworfen, der der Beste in seiner Klasse werden sollte. In dem Gehäuse arbeiten vier Empfänger, die jeweils paarweise im True Diversity verfahren miteinander verschaltet sind. An der Eingangsseite sitzen mikroprozessor-gesteuerte mitlaufende Eingangsfilter, die eine Schaltbandbreite von bis zu 240 MHz mit sehr hoher selektivität ermöglichen.

Ein leistungsstarker aber sparsamer DSP bietet als Hybridgerät das beste aus zwei Welten: Analog und Digital. Hohe Reichweite, störungsfreier Betrieb und unsere patentierte PTT funktion.

Varianten:

MCR41 ist die Version mit nur einem verbauten Empfänger. Er besitzt alle features des MCR42 und ist kompatibel mit dessen Firmware. Es ist möglich, einen MCR41 mit einem zweiten Empfänger zum MCR42 aufzurüsten.

Eigenschaften:

  • True Duversity Doppelempfänger in Einschub-Format oder als Einzelgerät
  • Schaltbandbreite bis zu 240MHz im UHF Bereich
  • DSP basierte Schaltung für unschlagbare Audioqualität. Digitale Ausgänge. PTT Funktion mit unserer patentierten Technologie bereits integriert.
  • 40 Gruppen aus 60 Frequenzen, vollständig programmierbar.
  • Multicomanding
  • Infrarot Schnittstelle for programmierung uns zur Synchronisation mit den Sendern.
  • Der exklusive digitale Wisycom Sub-Träger
  • erlaubt die Fernmessung von
    – Sender Batteriestatus
    – Einstellen des Tone-Squelch
    – PTT Funktionen (eine optionale
    Rückplatte mit Interkom Ausgängen ist erhältlich.)
  • Einfache Bedienung und Setup durch OLED Display
Download
Frequency rangesN option: 470 ÷ 700 MHz
M option: 566 ÷ 798 MHz
Switchable channels2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window Up 232 MHz
Frequencies microprocessor controlled frequency synthesizer circuit, with 25 kHz minimum step;
frequencies is easily PC reprogrammed with optional UPK300E/UPKmini programmer
Frequency error< ± 2.5 ppm, in the rated temperature range
Modulation FM, with de-emphasis
Nominal deviation±40 kHz (Max. operating dev. = ± 60 kHz)
“A” / “B” antenna inputswith SMA connectors
Antenna input impedance50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity2 μV ( 6 dBμV), for SND/N > 58 dB;
5 μV (14 dBμV), for SND/N > 98 dB
in the whole switching-window*
Amplitude response< 0.5 dB (RF input sig.: 6 dBμV ÷ 100 dBμV)
Co-channel rejection> 2.5 dB
Adjacent chan. selectivity> 80 dB typical (for ch. spacing ≥ 400 kHz)
Spurious rec. rejection> 100 dB
IF image rejection> 90 dB
Intermod. rejection> 76 dB
IIP3> +10 dBm typical
Spurious emissions< 2 nW (typical = 0.1 pW)
Noise Reduction systemENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
⇒ Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth30 Hz ÷ 20 kHz
Frequency response± 0.5 dB in the 30 Hz ÷ 19 kHz range
DistortionMCR42S: 0.3 % typical MCR42S2/S3: 0.1 % typical
SND/D ratio (Analogue)110 dB typical*
SND/D ratio (AES3)MCR42S: >125 dB typical MCR42S2/S3: >140 dB typical
Audio output2 audio line-outpus electronically balanced on two 3 pin mini-XLR Female connector
Audio output level Adjustable 1 dB step between (peak dev level):
-30dBu [MCR42S/S2/S3] /-18dBu [MCR42] to +12dBu [MCR42/S/S2] / +18dBu [MCR42S3]
Audio line-output imped.≤ 200 ohm
PTT line-output 1 & 2 Electronically balanced on a 5 pin mini-XLR Male connector
Digital outputdigital line-output 1 & 2 electronically balanced on 3 pin mini-XLR Male connector
Digital sample rateAES3 @ 48 kHz
POWER LEDs(NEW display) 1 multicolour RGB LEDs for the power status of the receiver
(OLD display) 2 multicolour RGB LEDs to easy indicate Rx1 & Rx2 power status
RF LEDs 2 multicolour RGB LEDs to easy indicates Rx1 & Rx2 RF status. Always on in normal operation
AUDIO LEDs 2 multicolour RGB LEDs to easy indicates Rx1 & Rx2 audio status
Front buttonsSimple operation with 4 buttons to quickly monitor and setup the receiver.
One touch function for a frequency scan and sync function.
Powering- External = 5 ÷ 18 Vdc (1.5 W max)
- Autonomous. = with optional BCA 42 Battery Module
(5 x IEC-LR6 1.5V size-AA alkaline or rechargeable elements)
Power consumptionMCR42 max 125mA @ 12V Approx. 6 hours (with battery pack BCA42)
MCR41 max 95mA @ 12V
Battery lifeapprox. 6 hours with battery pack BCA42 (5 x IEC-LR6 1.5V size-AA alkaline)
Temperature range-10 ÷ +55 °C
Dimensions“Slot-in” execution= 115 x 68 x 18 mm (HxWxD), “Stand-alone” exec.= 135 x 68 x 18 mm (HxWxD)
Weight180 g approx.
*RMS value, A-weighted, 22 Hz / 22 KHz
  • Dokumente

    • Brochure

      MCR42-en-b19

    • Certificate & Declaration

      MCR41-MCR42-N&M-EC DECLARATION

    • Drawing

      MCR42_dimensions

  • Anwendungen

    • Firmware

      MCR42_v3.21

    • Menu Tree

      MCR42_TreeMenu-v3.21

  • Bilder

Version:  v3.24

Date:  2019-02-14

MCR42

  • added support for new bands: Band 8 (B8: 940-960MHz) and Band P (BP:806-810MHz)
  • modified SYNC process for compatibility with Narrow band Transmitters
  • added Tone Squelch delay setting: configurable delay for the activation of the audio when the tone squelch is detected
  • added new panel lock mode (“ENC *”) which, when activated, loads all parameter values to default, except for:
      • Compander: ENC
      • Analog LINE level: + 12dBu

    In ENC lock mode * all panel parameters are locked except for:  Change group / channel / frequency, Audio levels settings

Firmware

Version:  v3.21

Date:  2017-10-07

MCR41S-42S

  • added: MCR42-S3 Version Management *
  • added: lock panel parameter in the preset
  • added: displaying the last loaded preset to the preset pages
  • fixed: wrong level battery indication on 688/Manager with SEN compander
  • fixed: wrong LINE level after the change from analog to digital
  • fixed: wrong Compander selection after the factory preset
  • fixed: wrong display group/channel after the factory preset when one receiver is OFF
  • fixed: wrong COM level after restoring
  • fixed: wrong indication of Change Group/Channel after saving of presets
  • fixed: deviation bar management issue when the calibration tone is activated

*NOTE: MCR42-S3 version is the latest hardware version of MCR42.

It increases the max analogue audio level to +18dBu for LINE and COM outputs (on the previous version the max level was +12dBu)

It allows the selection by software of the type of outputs on the Top Feed and Base. Based on the “Line Mode” choose, different output options are available:

– if LINE mode is set on Analog, you can choose between Line-A (Analog) and COM on both Top Feed and Base (socket)

– If LINE mode is set on AES3 (digital), you can choose between Line-D (digital) and COM on both Top Feed and Base (socket)

Firmware

Version:  v3.18

Date:  2016-12-05

MCR41S-42S

fixed: display of the audio bar level after calibration tone – even if the calibration tone is stopped, the audio bar level shows the output level of the previous calibration tone.

Steps to replicate the issue:

– Enter into the circular menu and go to the audio information.
– Start calibration tone on RX1
– Do nothing, just wait until the receiver jumps back to the status screen.
– When jumping back to the status screen the calibration tone stops which is correct but the audio bar in the status screen still shows for RX1 the output level of the calibration tone
This problem happens only with RX1, not happens with RX2.

fixed: problem to save the compander in the memory during loading of the preset.

Firmware

Version:  v3.17

Date:  2016-10-04

MCR41S-42S

new – management of Preset menu:
The first 3 preset can only be modified by PC (default name PRESET_x). The following two are editable by the receiver as well (default name USER_x)
Menu option for the Preset changed from “Restore” into “Load” and now it’s the first option available on the main menu.

new – ask for a factoory restore settings when recognized a different slot-in:
during the power on of the receiver, in case it recognizes an slot-in different from what was previously installed, the unit asks if you want to do a factory restore settings.

Firmware

Version:  v3.13

Date:  2016-05-18

MCR41S-42S

add: activation code  – (to enable/disable compander, SN depending)

fix: SYNC process – disabled SYNC process if the receiver is OFF

Firmware

Version:  v3.10

Date:  2016-04-29

MCR41S-42S

add – Q5X compander – enable in factory on request

Firmware

Version:  v3.9

Date:  2016-03-23

MCR41S-42S

fix – indication for S2 model during the starting of the receive:
S2 model means new receiver boards with new demodulator, hardware => 24, better SND/D ratio (AES3), less distortion

fix – disable audio level menu when RX turned off:
if a receiver is OFF, its “level audio” menu is disabled

Firmware

Version:  v3.7

Date:  2015-07-28

MCR41S-42S

fix – issue “Config ADVanced” settings with multicompanding option

Firmware

Version:  v3.6

Date:  2015-07-17

MCR41S-42S

fix – line level issue with hw 21 and 22 with fw v3.5: the menu “Audio Output> Line max level” allows to change the level on the range -18/+12dBu instead of -30/+12dBu

Firmware

Version:  v3.5

Date:  2015-07-07

MCR41S-42S

new – improved communication of MCR42 with SuperSlot SLK42-IKSS to SL6

fix – issue of battery data detection on MCR42 hw 23 with multicompanding option

Firmware

Version:  v3.4

Date:  2015-03-04

MCR41S-42S

new – add support of SuperSlot SLK42-IKSS

new – expander OVL: enabled only in factory

changed – audio bar: peak detect more slow

Firmware

Version:  v3.3

Date:  2014-12-18

MCR41S-42S

new – manager of headphones: add 2 parameters to adjust in separate way the volume of Left/Right channels and/or Rx1/Rx2 (available for stand alone socket BPA42HPN).

fix – expander issue: updating the firmware of some MCR42s to v3.1 with Wisycom Manager v0.5 (using MCR42 Updater v0.5.3.2) some expanders disappear! In some cases the issue is occured also using Wisycom Manager v0.6

add – all Wisycom expander: the firmware enables as default the following Wisycom expanders: ENR Wis, ENC Wis, ENR-1.2, ENC-1.2.

WARNING: The upgrade to v3.3 is possible only using Wisycom Manager v0.7

Firmware

Version:  v3.1

Date:  2014-10-27

MCR41S-42S

new – identification of BPA42BAG

changed – layout of menus: menu to change the receivers’ name (see pag 13)

new– circular quick menu to monitor&modify the main parameters

new – NAME + EXPANDER by CHANNEL: a preconfigured table relates the expander/name to a channel, new parameter «fast ch. Sel»

new – «Display timeout» OFF: the display never turn off automatically.

new – AUTO SQUELCH function on the circular quick menu

changed – preset names: in the past versions the preset names were fixed (1,2,3,Factory). The new version allows to write 12 characters for each preset using the new MCR4x Manager v1.0.0

Firmware
  • UFLA-SX

  • UFLA-IK-OP

  • UFLA-IK

  • BPA42-IKSS2

  • BPA42-IKSS

  • BPA42-IK

  • SLK42-SX2

  • SLK42-SX

  • SLK42-PH

  • PSP910-H

  • FLA42-SX

  • FLA42

  • MCRMNT-TOP-FL

  • BCL42

  • MCRMNT-BOT

  • MCRMNT-TOP

  • MCRMNT

  • AWKIT2

  • AWKIT1

  • AWM42RA

  • AWN42RA

  • AWM42

  • AWN42

  • CDC34

  • BCA42

  • CAP52-SX

  • CAP51-SX

  • CAP52-IK

  • CAP51-IK

  • CAM50-42

  • CAM50-41

  • CAM50-3

  • CAM30/50-2-R22

  • CAM50-2-TFR

  • VAP37

  • CAM50/120-2

  • CAU42-IKSS

  • BPA42BAG

  • BPA42HPN

  • BPA42PTT

  • BPA42-K

  • BPA41-K

  • UPKmini

  • BAGPL2

Konfigurator

EUJPUS
BMBN
EC2ECLEL2ELC
–5K
Auswahl zurücksetzen
Artikelnummer: n.a. Kategorien: Drahtlose Mikrofonsysteme, Empfänger für Rundfunk, Reportage und Filmton Schlagwörter: camera, dual-receiver, miniature, true-diversity, wireless

Vielleicht interessieren Sie sich auch hierfür …

  • MTH400

  • MTP40S

Get in Touch

Footer

Wisycom Srl
Via Tiepolo, 7/E
35019 Tombolo (PD) - Italy
VAT# IT02765640244

Tel. +39 0424 382605
e-mail : sales@wisycom.com

  • Vertriebsnetz
  • Datenschutzerklärung
  • Produktregistrierung
  • Datenschutzerklärung
  • Privacy Tools
  • Privacy Tools

Reservierte Inhalte, Ersatzteile, RMA-Anfragen und Marketingunterlagen für offizielle Distributoren.

Reserviert Bereich

WISYCOM © 2021