MPR60

Wideband True Diversity IEM/IFB Receiver

Designed for live events, high-end theater, and large-scale Houses of Worship, as well as Broadcast and Location Sound, the MPR60 is your solution for uncompromised performance.

This receiver features a real TRUE DIVERSITY configuration offering true freedom with unmatched frequency agility.
Just one Unit to Cover the Whole World!

Audio processing can be Stereo IEM, Mono IFB Wideband/Narrowband and 3 channels IFB selectable by the user.

Very easy and versatile thanks to its OLED display, navigation button controls and automatic scan.

FEATURES

Wideband Frequency Agility: 470-800, 823-832, 940-960, 1240-1260 MHz bands for maximum flexibility
Superior RF Efficiency & Robustness: superior with 400 kHz equidistance in IEM mode
Automatic Audio Power Limitation: Intelligently adjusts the output control by measuring the impedance of the in-ear headphones
Prepared for Remote Control: Future-proof your workflow
Exceptional Audio Quality & Channel Separation (>60 dB)
True Diversity Reception
Easy to Read Display – even in sunlight
Four Working Modes: IEM Stereo Multiplex, IFB wideband, IFB narrow band and 3 channels IFB (new firmware v1.3.0)
Noise Squelch Protection (IFB mode): looks at the quality of the signal
Tone Squelch Detection (IFB mode): for full compatibility with Wisycom transmitters
Multi-companding operations (IFB mode): ENS, ENR and ENC (new firmware v1.3.0)
Easy to Service: Easily replaceable RF connector via special tool
IP65 rating protection

Download

Frequency ranges	470-800 + 823-832 + 940-960 +1240-1260 MHZ
Switchable channels	2400, managed in 40 groups of 60 frequencies completely user customizable
Switching-window	379 MHz
Frequencies	Quartz PLL frequency synthesizer circuit (5 kHz step width)
Frequency error	< ± 2.5 ppm, within the rated temperature range
Diversity technique	True diversity
Modulation	IEM Stereo Multiplex, 200kHz RF BW, compatible with MTK982, MTK952 IFB Wideband 200kHz RF BW, compatible with Microphones (MTP60, MTP61, MTH610) WB modulation IFB Narrowband 100kHz RF BW, compatible with Microphones (MTP60, MTP61, MTH610) NB modulation 3ch-IFB, 200kHz RF BW, compatible with MTK982
Peak deviation	±48 kHz (IEM Stereo) ±56 kHz (IFB Wideband) ±35 kHz (IFB Narrowband) ±56 kHz (3ch-IFB)
“A” / “B” antenna inputs	SSMA connectors
Antenna input impedance	50 ohm (SWR < 1:2; typ. 1:1.4)
Sensitivity	2 μV (6 dBμV), for SND/N > 52 dB; in the whole switching-window*
Spurious emissions	< 2 nW (typical = 0.1 pW)
Noise Reduction system	ENS - Wisycom sound optimized (IEM and IFB) ENR - Wisycom noise optimized (IFB) ENC - Wisycom voice optimized with reduced pre-emphasys 3ch-ENS - Wisycom voice multichannels optimized (3ch-IFB)
AF bandwidth	30 Hz - 15 kHz (IEM Stereo) 45 Hz - 20 kHz (IFB Wideband) 45 Hz - 17 kHz (IFB Narrowband) 100 Hz - 7 kHz (3ch-IFB)
Frequency response	± 0.5 dB in the 30 Hz ÷ 15 kHz range
Distortion	0.3 % typical
SND/D ratio	90 dB typical*
Stereo separation	> 60 dB
Headphone-output	Stereo Plug 3.5mm(TRS) Locking (M6 x 0.5 thread), 2 x 125 mW @ 16 Ohm
Managing interface	Remote control interface (Bluetooth and LoRa) and proprietary waterproof magnetic connector 5 pin (USB HS +power)
LED	2 RGB LEDs (red, green and blue) for audio, RF and battery status
Display	Graphic high resolution display 180x350 px
Powering	2 x IEC-LR6 1.5V size-AA alkaline or rechargeable elements
Battery life	Approx. 3.5 hours (alkaline batteries), 6.5 hours (LBPXL lithium batteries)
Temperature range	-10 ÷ + 55 °C
Dimensions	93.3mm x 61mm x 22.4mm (HxWxD)
Weight	Approx. 140 g (without battery)
	* RMS value, A-weighted, 22 Hz / 22 KHz, and referred to the peak deviation